03.METEOR
The four lamps are turned on and off in one direction in a different colour (red, yellow, green, cyan, blue, magenta, white) and intensity. The speed of
the program is separately adjustable and a stroboscope effect can be also be activated.
04.FADE
7 different colours (red, green, blue, yellow, cyan, magenta, white), which successively fade in and out. The speed of the program is separately
adjustable and a stroboscope effect can be also be activated.
05.CHANGE
7 Different colours (red, green, blue, yellow, cyan, magenta, white) alternate with each other. The speed of the program is separately and a strobo-
scope effect can be also be activated.
06.-14.FLOW1-9
All FLOW programs 1 - 9 consist of various programmed colour change effects. The speed of the program is separately adjustable and a stroboscope
effect can also be activated.
NOTE:
The effect speed and stroboscope frequency can each be adjusted separately for programs 02 – 14. Press ENTER repeatedly until the cursor appears
in the top line of the display and then use the UP and DOWN buttons to select the desired program 02 – 14. Press ENTER again to confirm the
change and move the cursor to the field „Speedxx" in the bottom line. Now the effect speed can be set using the UP and DOWN buttons. „01" stands
for the slowest and „99" for the fastest speed. Pressing the ENTER button again confirms the input and moves the cursor to the „Flashxx" field. Now
the stroboscope effect can be set as desired using the UP and DOWN buttons. „Flash00" stands for stroboscope effect deactivated, „Flash01" for the
slowest and „Flash99" for the fastest flash frequency. Once the desired stroboscope effect has been set, press ENTER to confirm the input.
With the programs 13 and 14 (FLOW8 and FLOW9) the two colours to be used in the programs may be determined separately in addition to speed and
strobe effect. Select one of the programs FLOW8 or FLOW9 and press ENTER repeatedly, until C1:x C2:x appears on the display. The cursor is now
located at C1:x and you can use the UP and DOWN buttons to select the first colour, and after pressing ENTER again, you can select the second colour
(C2:x).
AUTO RUN
In AUTO RUN mode, various colour change, colour fade, and meteor programmes run in succession. Press the MODE button repeatedly until „AUTO
RUN" appears on the display. To set the number of repetitions for each program, press ENTER. The cursor appears in the bottom line, in the „FQN:xx"
field. Use the UP and DOWN buttons to set the number of repetitions for the individual programs. „FQN:01" stands for a single repetition, „FQN:99"
for 99 repetitions of the programs. Press ENTER to confirm the input.
FLOW INVERT
The direction of flows for lighting sequences, in the METEOR programme for example, can be inverted using the „FLOW INVERT" function. Press the
MODE button repeatedly until „FLOW INVERT" appears on the display. Now press ENTER, the cursor appears in the bottom line of the display. Using
the UP and DOWN buttons, select whether the direction is to be inverted (ON), or not (OFF). To confirm the input, press ENTER.
19