Drain Hose - Qlima D 810 Smart Bedienungsanleitung

DRAIN HOSE

Always make sure the tank is empty before connecting the drain hose
1. Use the pre-packed hose
2. Remove the drain stop.
3. Thread the drain hose onto the nozzle and always make sure it is locked securely.
4. Make sure the hose goes through the drain hole and is places downward.
5. Connect the hose to a drain, preventing it from being bent or obstructed.
Don't remove the water tank while the hose is connected.
When the drain hose is eventually removed, prepare for water leaking out of the hose or the
drain nozzle.
WIRELESS OPERATION (ONLY AVAILABLE ON SMART MODELS)
BASIC RF FEATURES
Parameter
Working frequency
Conducted power
Wireless standard
Data transmission rate
Antenna type
1. Enable bluetooth and WiFi on your phone or tablet. Use your phone to scan the
QR code below or search "Smart life" in Google play or App store to download
and install the app.
2. Open the app and sign in.
3. Press the 'MODE' button for 3 seconds to activate the Wi-Fi matching process.
4. Follow the instructions in the app.
NOTE:
• The unit supports 2.4 GHz Wi-Fi networks only. Check your network frequency, contact
your Internet provider or refer to your wireless router manual.
• If the unit is having trouble connecting to the Wi-Fi network, it may be too far from the
router.
• The Wi-Fi connection may be interrupted because of the home network and/or
surrounding wireless environment.
• The Wi-Fi connection may not work depending on the Internet provider.
Description
2.400 to 2.4835 GHz
13 dBm to 23 dBm
IEEE 802.11b/g/n (channels 1 to 14)
11b: 1, 2, 5.5, 11 (Mbps)
11g: 6, 9, 12, 18, 24, 36, 48, 54 (Mbps)
11n: HT20 MC S 0 to 7
PCB antenna with a peak gain of 2.54 dBi
4
25