FMS J-11 Bedienungsanleitung Seite 7

Model assembly
2.Install both wing halves over the wing spar and into
the wing slot of the fuselage. Secure the wings on the
fuselage using the included screws as shown.
Note: black wire to mark "-" , yellow wire to mark "s"
Ventral fin installation
1.Install the ventral fins to the fuselage slots as shown
in the figure, and slide them towards the rear of the
fuselage to fix in place.
Nosecone installation
1.Install the nose cone to the front of the fuselage as
shown, making sure that the nose cone is installed in
the correct direction.
7
HKM3.0*16mm
E
N