Operation; Start Operation; Control Panel - Cavecool CC428SB-SE Bedienungsanleitung

Operation

Start operation

1. Cleaning the compartment
Before power on, clean inside of the appliance and check the drainage pipe in good
connection. (For details, please refer to the "Maintenance and cleaning")
2. Placement
Before powering on, level the appliance on the firm & dry floor for at least 30 minutes.
3. Power on
The appliance start operation and it will cool down inside after 1 hour, otherwise you should
check the power connection.

Control panel

All keys would be invalid in lock mode. Please unlock first.
ON/OFF
1. Keep pressing the key 3 seconds, power down, goes to stand-by mode.
2. Keep pressing the key again 3 seconds to return back to normal working.
Light
Press the key, turn on or turn off the LED lights inside. In stand-by mode, the key is
invalid.
UP
Press the key once, LED Display in regular flash showing current set temperature. Continue
pressing to adjust set temperature, one press increase 1℃. Regular flash quit after 5 seconds
detecting no press and new set temperature save. LED display return to show actual temperature
inside.
Down
Press the key once, LED Display in regular flash showing current set temperature. Continue
pressing to adjust set temperature, one press reduce 1℃. Regular flash quit after 5 seconds
detecting no press and new set temperature save. LED display return to show actual temperature
inside.
Child Lock (Combination key)
1. Lock: Press both keys at the same time for 3 seconds to lock.
2. Unlock: Press both keys at the same time for 3 seconds to unlock.
EN-6