Features; Installation/Setup - Renkforce DL-LED107S Bedienungsanleitung

• Do not expose the device to any high temperatures, dripping or splashing water, strong vibra-
tions or heavy mechanical stress.
• Do not place any open sources of fire, such as burning candles, on or directly next to the de-
vice.
• Consult an expert if you are unsure as to the function, safety or connection of the product.
• Never operate the device unattended.
• Only operate the device in moderate climate, never in tropical climate.
• Do not leave any packing material unattended. It may become a dangerous toy for children.
• At industrial sites, the accident prevention regulations of the association of the industrial wor-
kers' societies for electrical equipment and utilities must be followed.
• If you are not sure about the correct connection or if there are any questions that are not co-
vered by the operating instructions, do not hesitate to contact our technical support or another
specialist.

5. Features

• 3 or 6-channel DMX control (switchable)
• Integrated controller for automatic mode, master-slave mode and sound-to-light control
• 16 colour effects with adjustable speed
• LED high-performance luminaire
• LED display for easy programming
• Mains output to direct power supply of other light effects
6. Installation/ Setup
The setup and the installation of the device must be carried out by a specialist who is familiar
with the hazards and the relevant regulations. Maintenance, operation and commissioning of
this device must only be carried out by qualified persons.
When choosing a place of setup or mounting site for your device, make sure to avoid shocks, vi-
bration, dust, hot and cold temperatures and dampness. Furthermore, no powerful transformers
or motors must be used close to the device.
The device must be set up out of normal reach.
20