Loading Dishes - Haier XIB 6B2S3FS Bedienungsanleitung

LOADING DISHES

USING THE UPPER BASKET
The upper basket is provided with mobile racks
•
hooked to the sides of the basket, which can
be regulated into 4 positions.
In the lowered position (A-A1) the racks may
•
be used for such items as: tea and coffee cups,
kitchen knives and ladles. Also glasses with
stems may be safely hung on the ends of the
racks.
It is advisable to load large plates (approx. 26 or
•
more cm) slightly tilted towards the rear to
facilitate introduction of the basket into the
machine.
Salad bowls and plastic bowls may also be
•
loaded on the upper basket. It is advisable to
block these in place so that the jets of water do
not make them overturn.
The upper basket has been designed to offer
•
maximum flexibility in use and can be loaded
with up to 24 plates on two rows, up to 30
glasses on five rows or a mixed load.
A standard daily load is represented in fig. 1
Figure 1
USING THE LOWER BASKET
Saucepans, oven dishes, tureens, salad bowls,
•
lids, serving dishes, dinner plates and soup
plates can be loaded into the lower basket.
Place the cutlery in the plastic cutlery holder
•
with the handles pointing upwards and place
the cutlery holder on the lower basket (fig. 5)
making sure that the cutlery does not get in
the way of the rotating arms.
Foldable racks (Only on some models)
In the lower basket you can find the foldable
racks (fig.2 and fig.3) useful to provide the best
stability to the dishes. With not standard
dimension and/or shape ones you can
raise/lower the racks to guarantee maximum
load flexibility.
Figure 2
Figure 3
EN 91