Remote Control (Wi-Fi) - Haier XIB 6B2S3FS Bedienungsanleitung

REMOTE CONTROL (Wi-Fi)

This appliance is equipped with Wi-Fi technology
that allows the machine to be remote controlled
via an app.
APPLIANCE PAIRING (ON APP)
Download the hOn App on your device by
•
framing the following QR code:
or by the link:
go.haier-europe.com/download-app
The hOn app is available both for Android and
for iOS tablets and smartphones.
To discover all the details of the Wi-Fi features,
explore the app menus in DEMO mode.
Make sure the router is turned on and your
•
smartphone/tablet is connected to your
home Wi Fi network.
The frequency of the home Wi-Fi network has
to be set on the 2.4 GHz band. You can not
configure the machine if your home network is
set to the 5 GHz band.
Turn on BLUETOOTH
•
smartphone/tablet (if available).
Open the App, create the user profile (or log-in
•
if it is already created previously) and pairing the
appliance following the instructions on the
device display or the procedure described in the
"Quick Guide" that comes with the appliance.
Turn on the dishwasher by pressing the
•
ON/OFF button for 3 seconds when
instructed to do so in the app.
Press "PROGRAMME SELECTION / REMOTE
•
CONTROL" button for 3 secs  the message
"ENROLMENT" will scroll on the display and
the " Wi-Fi " indicator light will be off.
Within 60 secs.
•
START" button pressed for 3 secs., and the
message "EASY" will appear on the display for 5
mins, the Wi-Fi indicator light will start to flash
slowly 3 times and then turn off for 2 seconds.
on your
keep the "DELAY
Enter the password of your home Wi-Fi
•
network in the App and complete the
procedure.
Successful pairing
The message "CONNECTED" will appear on
•
the display once, after which the message
"REMOTE CONTROL" will appear and the "Wi-
Fi" indicator light will be steady on.
You can now control the machine from the
•
App.
Unsuccessful pairing
If enrolment fails (or does not succeed within 5
mins.):
"TRY AGAIN" will appear on the display.
•
The machine will not be connected.
•
Repeat the pairing procedure from the App.
•
RESET WiFi
In case of problems or change of the home
router settings
name/password, internet supplier, etc...) you
have to perform the pairing procedure again,
removing the product from the App, or changing
the Wi-Fi network credentials from the
appliance settings, within the App.
ENABLING REMOTE CONTROL
Whenever you want to use the machine with
remote control:
Make sure that the router is switched on and
•
connected to the Internet.
Fill the dishwasher, add detergent.
•
Turn on the dishwasher.
•
Press "PROGRAMME SELECTION / REMOTE
•
CONTROL" button for 3 secs.  The
message "REMOTE CONTROL" will appear on
the display.
Close the door.
•
You can now check the machine from the App.
•
DISABLING REMOTE CONTROL
To exit remote control, press "PROGRAMME
•
SELECTION button/ REMOTE CONTROL"
again for 3 secs.
When no cycle is under way:
•
- The Wi-Fi indicator light will start to flash
slowly and the message "REMOTE
CONTROL OFF" will appear on the display.
EN 108
(e.g.: change network