Haier XIB 6B2S3FS Bedienungsanleitung Seite 87

HYDRAULIC SAFETY DEVICES
All the dishwashers are equipped with an
overflow safety device which, if water
exceeds normal levels due to malfunctions,
automatically blocks water flow and/or drains
excess quantities.
SOME MODELS may include one or more of the
following features:
WATERBLOCK (fig. 3)
•
The waterblock system has been designed to
improve the safety of your appliance. The
system prevents flooding which might be
caused by a machine malfunction or as a result
of a fracture on the rubber pipes and in
particular on the water supply pipe.
How it works
A sump located on the base of the appliance
collects any possible water leakage and
operates a sensor which activates a valve placed
under the water tap and blocks any water, even
with the tap fully opened.
If box "A" containing the electrical parts is
damaged, remove the plug from the socket
immediately. To ensure perfect operation of the
safety system, the hose with box "A" should be
connected to the tap as shown in the figure. The
water supply hose should not be cut, as it
contains live parts. If the hose is not long enough
for correct connection, it must be replaced with
a longer one. The hose can be obtained from the
Technical Assistance Centre.
3
AQUASTOP (fig. 4):
•
A device located on the supply tube that stops
water flow if the tube deteriorates; in this case,
a red mark will appear in the window "A" and the
tube must be replaced. To unscrew the nut,
press the one-way lock device "B".
4
AQUAPROTECT - SUPPLY TUBE WITH
•
GUARD (fig. 5):
Should water leak from the primary internal
tube "A", the transparent containment sheath
"B" will contain water to permit the washing
cycle to complete. At the end of the cycle,
contact the Customer Service Centre to
replace the supply tube.
5
EN 87