Internal Programs, Sound Control; Setting The Sound Sensitivity; Dmx Mode; Addressing - EuroLite LED PAR-64 RGBW+UV Bedienungsanleitung

Internal Programs, Sound Control

Press the MODE button to select the internal program mode. When the display shows P, you can select the
desired internal program, with or without sound control, via the UP or DOWN buttons (see following graphic).
Please press the ENTER button to confirm and then the MODE button to attain the main menu.
Mode: Value:
P1
P2
P
P3
P4
P5
P6

Setting the Sound Sensitivity:

Manual adjustments via Control Board as follows:
Mode: Value:
S
S00-S99
You can select the desired sensitivity via the UP or DOWN buttons.
Please press the ENTER button to confirm and then the MODE button to attain the main menu.

DMX MODE

You can control the devices individually via your DMX-controller. Every DMX-channel has a different
occupation with different features. The individual channels and their features are listed under DMX-protocol.
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the device will respond to the controller.
Please, be sure that you don't have any overlapping channels in order to control each LED PAR-64
RGBW+UV Short Spot correctly and independently from any other fixture on the DMX-chain.
If several LED PAR-64 RGBW+UV Short Spots are addressed similarly, they will work synchronically.

Addressing

Press the MODE button until the Control Board shows Add. You can now set the desired address via the UP
or DOWN buttons.
Please press the ENTER button to confirm and then the MODE button to attain the main menu.
Setting the DMX Start Address:
Mode:
Add 001 - 512
Controlling:
After having addressed the LED PAR-64 RGBW+UV Short Spot, you may now start operating it via your
lighting controller.
Note:
The modes of DMX 512 data are shown via the DMX indicator (a point on the Control Board).
After switching on, the device will automatically detect whether DMX 512 data is received or not. If the data
is received, a point will blink on the Control Board.
If there is no data received at the DMX-input, the point will not blink.
Endless loop in 32 colors, color change
Endless loop in 20 colors, color fade
Endless loop in 5 colors, color change
Endless loop in 5 colors, color fade
Endless loop in 31 colors, via sound control
Endless loop in 5 colors, via sound control
Sensitivity:
Increasing sensitivity
Value:
Function:
23/26 00077191.DOC, Version 1.0