Control Board; Setting Solid Colors; Internal Programs, Sound Control - EuroLite LED ML-30 QCL 7x8W Bedienungsanleitung

Control Board

The Control Board offers several features: you can run the internal programs or set the
starting address.
Browse through the main menu by pressing MODE. You can change the selection by pressing
UP or DOWN. The functions provided are described in the following sections.
The display shuts off after 30 seconds of inactivity. With the touch of a button it lights up again.

Setting Solid Colors

Press the MODE button to select the solid color mode. When the display shows C, you can select the
desired solid color via the UP or DOWN buttons (see following graphic).
Mode:
C

Internal Programs, Sound Control

Press the MODE button to select the internal program mode. When the display shows P, you can select the
desired internal program, with or without sound control, via the UP or DOWN buttons (see following graphic).
Mode:
P
Value:
C01
C02
C03
C04
C05
C06
C07
C08
C09
C10
C11
C12
C13
C14
C15
Value:
P01
P02
P03
P04
P05
P06
Endless loop in 15 colors,
P07
Endless loop in 15 colors,
P08
Endless loop in 15 colors,
P09
Function:
Red
Green
Blue
White
Medium yellow
Cyan
Pastel blue
Salmon
Pastel green
Magenta
Frost white
Light yellow
Rose
Turquoise
Pure white
Function:
Endless loop in 7 colors,
change every 3 seconds
Endless loop in 7 colors,
fade every 3 seconds
Endless loop in 3 colors,
change every 3 seconds
Endless loop in 3 colors,
fade every 3 seconds
Endless loop in 7 colors,
via sound control
Endless loop in 3 colors,
via sound control
change every 3 seconds
fade every 3 seconds
via sound control
21/24 00060603.DOC, Version 1.1