Setting Solid Colors; Internal Programs; Sound Control/ Sensitivity - Eurolite Led Sls-144 Rgbw -144 Rgbw Floorspot Bedienungsanleitung

Setting Solid colors

Press the MODE button to select the solid color mode. When the display shows "C-", press ENTER. You can
select the desired solid color via the UP or Down buttons (see following graphic). Press ENTER in order to
confirm.
Mode:
C

Internal Programs

Press the MODE button to select the internal program mode. When the display shows " P- ", press ENTER.
You can now select the desired internal program, with or without sound control, via the UP or DOWN buttons
(see following graphic). Press ENTER in order to confirm.
Mode:
P

Sound control/ sensitivity

Press the MODE button until the display shows S-- , then press ENTER. You can now select the desired
sensitivity, 001-100 with increasing sensitivity, via the UP or DOWN buttons.
Press ENTER in order to confirm.
Master/Slave Setting
Set the Master device to one of the Stand Alone modes.
To set the Slave units, press the MODE button to select the SLAu mode then press ENTER. The devices set
in this manner can now be controlled by the master unit.
Value:
C 1
C 2
C 3
C 4
C 5
C 6
C 7
C 8
C 9
C 10
C 11
C 12
C 13
C 14
C 15
Value:
P 1
P 2
P 3
P 4
P 5
P 6
P 7
P 8
P 9
Function:
Red
Green
Blue
White
Medium yellow
Rose pink
Steel blue
Frost white
Dark pink
Light green
Dark blue
Light orange
Pink carnation
Blue mist
Pure white
Function:
Endless loop in 7 colors,
change every 3 seconds
Endless loop in 7 colors,
fade every 3 seconds
Endless loop in 3 colors,
change every 3 seconds
Endless loop in 3 colors,
fade every 3 seconds
Endless loop in 7 colors,
via sound control
Endless loop in 3 colors,
via sound control
Endless loop in 15 colors,
change every 3 seconds
Endless loop in 15 colors,
fade every 3 seconds
Endless loop in 15 colors,
via sound control
21/24 00076701.DOC, Version 2.0