Position Values; Position - TR-Electronic CMV-22 Gesamt-Bedienungsanleitung

Parameterization via TRWinProg

8.2 Position values

8.2.1 Position

In the online state in the field Position the current measuring system position is
displayed.
With entering of a value into the field Position the measuring system can be
adjusted on the desired position value. The new position is set if the function Data
write to device is executed.
 TR-Electronic GmbH 2009, All Rights Reserved
Page 54 of 56 TR - ECE - BA - DGB - 0072 - 03
Printed in the Federal Republic of Germany
02/15/2016