KERN CDS Serie Betriebsanleitung Seite 99

Procedure:
3. Define limit values



TCDS-A-BA-def-2311
 Make sure that the scale is in counting mode and that an
average piece weight has been defined (see chap. 9.2.1).
If necessary, switch over with the
 Use the navigation keys  to select the setting < check
 limits > and confirm with ➔ button.
< limupp > will appear.
 Press ➔ button to confirm, the numeric input window for
entering the upper limit value will appear.
The active digit is flashing.
 Enter upper limit value (numerical input see chap. 3.2.2)
and confirm the entry.
The balance returns to the < limupp> menu.
 Use the navigation keys  to select setting < limlow >.
 Press ➔ button to confirm, the numeric input window for
entering the lower limit value will appear. The active digit is
flashing.
 Enter lower limit value (numerical input see chap. 3.2.2)
and confirm the entry.
The balance returns to the < limlow> menu.
 Press repeatedly -button to exit menu. Finished the
setting works, the weighing balance will be ready for check
counting.
button.
37