Mains Connection - KERN CDS Serie Betriebsanleitung

7.4 Mains connection

Select a country-specific power plug and insert it in the mains adapter.
Check, whether the voltage acceptance on the scales is set correctly. Do
not connect the scales to the power mains unless the information on the
scales (sticker) matches the local mains voltage.
Only use KERN original mains adapter. Using other makes requires
consent by KERN.
Important:
➢
Before starting your weighing balance, check the mains cable for
damage.
➢
Ensure that the power unit does not come into contact with liquids.
➢
Ensure access to mains plug at all times.
16 TCDS-A-BA-def-2311