KERN CDS Serie Betriebsanleitung Seite 100

4. Start tolerance check:
 Determine the average item weight, see chap. 9.2.1
 Place the weighed material and check by means of the tolerance marks / acoustic
signal if the weighed material is within the defined tolerance.
Load below specified
tolerance
The entered values will remain valid until new values are entered.
To delete the values, select menu setting < check >  < limits > 
< clear > and confirm on ➔ button.
38
Load within specified
tolerance
Load exceeds specified
tolerance
TCDS-A-BA-def-2311