Procedure:
1. Define target quantity and tolerances
34
Make sure that the balance is in counting mode and that
an average piece weight has been defined (see chap.
9.2.1).
If necessary, switch over with the
Use the navigation keys to select the setting < check
target > and confirm with ➔ button.
< value > is displayed.
Confirm on ➔ button, the numeric input window appears.
The active digit is flashing.
Enter the target number of pieces (numerical input see
chap. 3.2.2) and confirm the entry.
The balance returns to the < value > menu.
Use the navigation keys to select the setting <
Errupp> and confirm on ➔ button.
Use the navigation keys to select the weighing unit and
confirm on ➔ button.
The numeric input window appears. The active digit is
flashing.
Enter the upper tolerance (for numeric input see chap.
3.2.2) and confirm the entry.
The balance returns to the < Errupp > menu.
key.
TCDS-A-BA-def-2311