Load Fail-Safe Defaults; Load Optimized Defaults; Set Password; Save & Exit Setup - Abit AX78 Bedienungsanleitung

Inhaltsverzeichnis

All manuals and user guides at all-guides.com

FanEQ Stop Control

This item sets the lowest speed ratio for the 3-pin fan assembly connected at "SYSFAN1" fan

power connector to run at when the temperature of "FanEQ Reference Temp." detected is

lower than the value of item "FanEQ Target Temp." plus the value of item "FanEQ Temp.

Tolerance".

In the situation when the temperature of "FanEQ Reference Temp." detected is higher than the

value of item "FanEQ Target Temp." plus the value of item "FanEQ Temp. Tolerance", the

speed ratio for the 3-pin fan assembly connected at "SYSFAN1" fan power connector will first

run at the speed ratio set by the item "FanEQ Start Control", and then up to 100%.

All Voltages, Fans Speed and Thermal Monitoring

These unchangeable items list the current status of the CPU and environment temperatures, fan

speeds, and system power voltage.

2.9 Load Fail-Safe Defaults

This option loads the BIOS default values for the most stable, minimal-performance system

operations.

This option loads the BIOS default values that are factory settings for optimal-performance

system operations.

This option protects the BIOS configuration or restricts access to the computer itself.

2.12 Save & Exit Setup

This option saves your selections and exits the BIOS setup menu.

This option exits the BIOS setup menu without saving any changes.

2-16

AX78

Inhaltsverzeichnis