Inhaltsverzeichnis
Werbung
4. Place the heatsink and fan assembly
onto the retention frame. Match the
heatsink
clip
with
mounting-lug. Hook the spring clip to
the mounting-lug.
5. On the other side, push the retention
clip straight down to lock into the plastic
lug on the retention frame.
6. Connect the CPU cooling fan power
cable to the CPUFAN1 connector on this
motherboard.
3-pin
※ Either a
or
fan connected to the "CPUFAN1"
connector is still capable of having
its fan speed controlled. Please refer
to the BIOS setup route: "PC Health
Status"
"CPU FANEQ Control"
"CPU FAN Type" to select the one of
your own.
Also, please watch out for the
orientation when inserting 3-Pin
plug into this 4-Pin fan connector.
※ The motherboard in this illustration is served for DEMO only, may not be the
same type or model as the one described in this user's manual.
※ A higher fan speed will be helpful for better airflow and heat-dissipation.
Nevertheless, stay alert to not touch any heatsink since a high temperature
generated by the working system is still possible.
1-10
All manuals and user guides at all-guides.com
the
socket
4-pin
CPU cooling
AX78
Werbung
Inhaltsverzeichnis
