Cleaning The Water Tank, Filter Holder And Water Level Sensor; Descaling; Storage; Accessories And Replacement Parts - Beurer LB 200 Gebrauchsanweisung

8.5 Cleaning the water tank, filter holder and water level sensor

The water tank , filter holder
8
cleaned in the dishwasher from time to time. The parts should not
be exposed to temperatures above 45°C. The water level sensor
can be disconnected from the filter holder
it. To reassemble, reinsert the water level sensor
holder . Alternatively, you can also clean the water tank
7
holder and water level sensor
7
solution.

8.6 Descaling

We recommend descaling the filter
Use a citric acid solution (6 g pure citric acid powder dissolved per 1 litre of water) as a descaling solution.
Descaling the filter
1. Fill a container with descaling solution.
2. Place the filter holder
all parts are covered.
3. Leave for one hour. Then rinse everything thoroughly under running water. Never squeeze out the filter
as this may deform it.
4
4. Repeat this procedure if necessary.
Descaling the water tank
1. Fill the water tank
2. Leave for one hour.
3. Rinse out the water tank
4. Repeat this procedure if necessary.

8.7 Storage

When you are not using the device, we recommend that you carry out the following actions:
1. Empty any remaining water from the water tank
2. Dry the filter using the filter drying function (see section "8.1 Filter drying function") or allow it to air dry.
4
3. Clean the filter
4
4. Store the air humidifier in its original packaging and in a dry environment.
5. Store the humidifier without weighing it down.

9. ACCESSORIES AND REPLACEMENT PARTS

To purchase accessories and replacement parts, please visit www.beurer.com or contact the correspond-
ing service address (according to the service address list) in your country. Accessories and replacement
parts are also available from retailers.
Designation
Replacement filter
and water level sensor
7
manually with a mild cleaning
5
and the water tank
4
including water level sensor
7
with descaling solution up to the "Max." marking
8
with running water.
8
, water tank , filter holder
8
can be
5
5
by simply pulling
7
into the filter
5
, filter
8
weekly.
8
and filter
5
.
8
and water level sensor
7
Item number and/or order number
110.005
28
in the descaling solution so that
4
.
6
.
5