Device Description; Initial Use; Usage; Starting Use - Beurer LB 200 Gebrauchsanweisung

5. DEVICE DESCRIPTION

The associated drawings are shown on page 3.
Air humidifier
Control panel
1
Air outlet
2
Motor unit
3
Filter
4
Water level sensor
5
"Max." mark
6
Filter holder
7
Water tank
8
Air inlet
9

6. INITIAL USE

1. Open the cardboard packaging.
2. Remove the device from the top of the box without opening the film bag.
3. Remove all films and adhesive strips. Remove the filter
the filter") and take it out of the plastic film. Then re-insert the filter
4. Check the device, mains plug and cable for damage.

7. USAGE

7.1 Starting use

Step 1: Position the air humidifier
1. Place the air humidifier on a stable, horizontal and level surface to
prevent vibrations and noise. Never move the air humidifier during use.
2. Set up the air humidifier in such a way that provides 30 cm clearance
on all sides.
3. Make sure that the air inlet
Control panel
ON/OFF button
10
Display
11
(shows current relative humidity, fan speed and timer duration)
Target humidity indicator
12
Target humidity button
13
Timer button
14
Fan speed button
15
NIGHT indicator
16
(lights up when NIGHT mode is active)
AUTO indicator
17
(lights up when AUTO mode is active)
Filter drying indicator
18
(lights up when filter drying function is active)
Filter change indicator
19
(lights up when filter change is necessary)
Water tank indicator
20
(lights up when the water tank is empty/needs to be refilled)
and air outlet are never blocked.
9 2
23
from the device (see section "8.3 Changing
4
into the device.
4