Cameo OPUS SP5 PLUS Bedienungsanleitung Seite 19

SLAVE MODE (Slave)
The slave operating mode is selected as previously described under item "STAND ALONE OPERA-
TING MODES". Connect the slave unit and the master unit (same model, same software version)
using a DMX cable (master DMX OUT - slave DMX IN) and activate one of the standalone modes
Auto or Static in the master unit. The slave unit will now follow the master unit. Press MODE
repeatedly to return to the main display.
SYSTEM SETTINGS (Settings)
Starting from the main display, press ENTER to enter the main menu. Select the Settings menu for
the system settings using the UP and DOWN control panels and press ENTER.
This will take you to the submenu for setting the submenu items (see table, select with UP and
DOWN, confirm with ENTER, change value or status with UP and DOWN, confirm with ENTER).
Settings (bold = factory setting)
Display
Display
Settings
Operating status
DMX fail when DMX signal is
interrupted
Dimmer Selecting the
curve Dimmer curve
OFF No display rotation
Reverse
ON
OFF
Backlight
ON
Black Activates blackout
Hold Last command is retained
Car activates Auto mode
Light intensity increases linearly with
Linear
DMX value
Display is rotated through 180°
(e.g. for overhead installation)
Deactivation of the display
lighting after approx. 30 seconds
of inactivity
Display lighting permanently on
19