Technical Data - Klauke SDK32 Bedienungsanleitung

Instruction Manual
SDK32 / SDK32P33 / SDK32P33M
Attention
Have the power tool repaired by a qualifi ed expert or by a Klauke Service Center (ASC).
4.4 Remarks which (spare) parts are allowed to be changed by the customer.
Within the warranty period the customer is not allowed to make repairs on their own. Do not remove parts such as
screws and other components.
5. Trouble Shooting
When the cutting head is leaking hydraulic oil the cutting head must be sent to one of our authorized service centers
(ASC's).
If the blades should get stuck when cutting fi ne stranded cables
the blades can be released using a screw driver as shown in the
picture to the right. Move the screw driver in the direction of the
arrow while simultaneously actuating the Emergency stop button
on the pumping unit until the piston retracts automatically..

6. Technical Data

Cutting range:
Weight:
Hydraulic oil:
Operation pressure:
Note
Additional copies of this instruction manual are available upon request. The part # is HE.14340.
The Instruction Manual can also be downloaded from our Homepage www.klauke.textron.com.
HE.14340_A © 05/2012
All manuals and user guides at all-guides.com
max. 32 mm
approx. 1,3 kg
Rivolta S.B.H. 11
700 bar
e.g. AHP 700-L
+
pic. similar
4
GB