Instruction Manual K104/1
______________________________________________________________________________________________________________
3.3. Maintenance instruction
This mechanical cutting tool has to be cleaned and dried after use. The tool is basically
maintenance-free, only the gear teeth should be cleaned after each use. The bolt joints
and the ratchet mechanism have to be oiled regularly.
3.4. Storage and transport of the cutting tool
In order to protect the tool against damages it must be stored in a clean and dry state in a
carrying case.
4. Technical data
Weight:
Length:
Cutting range:
Instruction Manual K104/1
_______________________________________________________________________________________________________________
3.3. Maintenance instruction
This mechanical cutting tool has to be cleaned and dried after use. The tool is basically
maintenance-free, only the gear teeth should be cleaned after each use. The bolt joints
and the ratchet mechanism have to be oiled regularly.
3.4. Storage and transport of the cutting tool
In order to protect the tool against damages it must be stored in a clean and dry state in a
carrying case.
4. Technical data
Weight:
Length:
Cutting range:
approx. 5,7 kg
approx. 870 mm
max. 100 mm ∅ (e.g. 4x400 mm² NAYY)
approx. 5,7 kg
approx. 870 mm
max. 100 mm ∅ (e.g. 4x400 mm² NAYY)
page 11
page 11