Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.
Replace with new battery. Attach firmly with the connector.
6.
Close the battery cover and secure with the screws.
CLEANING AND MAINTENANCE
1. Make sure the machine is unplugged before cleaning.
2. Do not clean the machine and power supply by immersing in water or in other liquids.
3. Metal parts (power plug or terminal): wipe them with a clean dry cloth.
4. Plastic parts: wipe them gently by a clean, soft cloth together with water or a mild detergent.
5. Wipe the four cliff sensors by soft cloth.
6. Do not use gasoline, alcohol and other strong irritant cleaning lotion to clean the machine.
7. Store the machine in a cool and dry place.
PRODUCT SPECIFICATIONS
Voltage: 14.4V DC
Current: 1.0A
Adaptor input: 100-240V~ 50/60Hz
Adaptor Output: 17.5V
Charging time: Around 2.5hrs.
Continuously working time: 90-120min.
TROUBLESHOOTING
1.
Check if the set working time is over;
2.
Check if the wheels being uplift, if so, clear the wheels;
3.
Check if there is any fault code on display panel;
Faulty code
E1
Low voltage
E2
Cliff sensor malfunction
E3
Wheels stucked, overload
E4
Middle brush overload
E5
Suction motor overload
E6
Suction motor malfunction
E7
Battery malfunction
E8
Dustbin missed or position
improperly
Remark: If fault occurs, a warning sound will be heard. Press "exit/ cancel button" in the remote control or
any key in the control panel to stop the warning sound and back to the standby mode.
0.65A
Problem
Charge the appliance
Clean the cliff sensor
Check and clear the wheels
Check and clear middle brush, do not use it in thick carpet
Clean the filters
Restart the appliance, if it is still not worked properly, send the
appliance for repairing.
Release the connector of the battery and connect again.
Put dustbin in and press it slightly to the proper position.
Solution
- 21 -
Werbung
Inhaltsverzeichnis
