Operating - Sauber SB2 Bedienungsanleitung

HOW TO ASSEMBLE THE SIDE BRUSH
There is a hexagonal hole at the bottom of side brush. Align the brush with the hexagonal hole facing down and
press it until clicks in the unit.
Before cleaning, make sure the side brush has been well assembled.

OPERATING

1. Power on: switch the Power switch to Position "I" to turn on the appliance.
2. Power off: switch the Power switch again to Position "O" to turn off the appliance.
3. Start working: in standby condition, press button "
appliance cannot work when the time setting is "00".
4. Stop working: in working condition, press any key in the control panel to stop working.
5. Working time setting: in standby mode with the "MIN" light lights up, press button "+" in the control
panel to increase the working time; press button "-"to decrease the working time. The set time will
automatically decrease during operation. When the time shows "00", the appliance will stop working and
automatically go for the charging base for charging.
Note:
When the appliance is in standby mode:
1. Press Auto cleaning button in the remote control, the appliance will start to clean in random cleaning
mode; then if you press Quick cleaning button in the remote control, the appliance will work on a fast
speed or press Slow cleaning button, the appliance will work on a slow speed.
2. Press Spot cleaning button in the remote control, the appliance will do spiral cleaning in situ.
Cleaning tips:
(1) If you only need to clean a single room, close the room door.
(2) If there is any obstacles that the appliance cannot deal with, please remove it to avoid the machine blocked
intermittently during the cleaning work.
WALKING PROGRAM
Turn on the appliance. Firstly the appliance will take a straight line to clean, then go into random cleaning
mode. According to the situation of cleaning area (for example: size of cleaning area, size of obstacle, quantity
of obstacle, edges etc.), the machine will auto switch cleaning mode (auto, spot, edge cleaning) to achieve the
best cleaning effect.
" in the control panel to start working. The
- 17 -