Levelling; Change Of The Hinge Position; Preparatory Measures - yuna FEDORA EKG275 Bedienungsanleitung

3.4 Levelling

❖ Use the adjustable supporting feet for proper levelling and for proper air
circulation in the lower sectors of the appliance. Adjust the supporting feet using
a suitable spanner.
The appliance must stand in a stable and level position to ensure proper
operation. The supporting feet must stand firmly on the ground so that the
appliance does not wobble. Adjust the supporting feet accordingly. The firm
contact of the supporting feet with the ground also ensures that the appliance
does not vibrate or move unintentionally.
If you have to move the appliance, set the adjustable feet to minimum position.
Readjust the appliance when transport has been completed.

3.5 Change of the hinge position

WARNING! Switch off and unplug the appliance before changing the
hinge position. RISK OF ELECTRIC SHOCK!
CAUTION! The change of the position must be carried out by at least
two persons; otherwise, you may hurt yourself or damage the appliance.
NOTICE! You should contact a qualified technician if you want to have
the door swing reversed. Only try to carry out the steps described below
when you believe that you are qualified to do so.
NOTICE! Adjust the doors properly before you finally tighten the screws of
the hinges. The seals must close properly.
NOTICE! Do not tilt the appliance more than 45
➢ Empty the appliance.
➢ If possible, remove all door trays, glass shelves and drawers from the appliance
so that they cannot be damaged.
➢ It is necessary to tilt the appliance backwards while removing the doors. Lean the
appliance against a solid and immovable surface so it will not slip while changing
the hinge positions.
➢ Do not lay the appliance flat as this can damage the cooling system.
P
REPARATORY MEASURES
0
.
64