SQlab GRIFFE 710 Bedienungsanleitung Seite 25

Category 3 according to DIN EN 17406
Refers to bicycles and EPACs to which condition 1 and condition 2 apply, and which are also used on rough
trails, uneven unpaved roads, as well as on difficult terrain and undeveloped paths, and for whose use techni-
cal skill is required. Jumps and drops should be less than 60 cm.
Average speed in km/h
Maximum drop/jump height in cm
Intended Use
Bike type
This is a set of conditions for operation of a bicycle/component that includes Condition 1 and Condition 2 as
well as rough trails, rough unpaved roads, and rough terrain and unimproved trails that require technical skills.
Jumps and drops are intended to be less than 61 cm (24 in.).
Category 4 according to DIN EN 17406
Refers to bicycles and EPACs to which conditions 1, 2 and 3 apply and which are used for descents on unpaved
roads at speeds of less than 40 km/h. Jumps shall be less than 120 cm.
Average speed in km/h
Maximum drop/jump height in cm
Intended use
Bike type
Recommended riding skills
Category 4 according to ASTM F2043-13
Bicycles/add-on parts in this category may, in addition to the operating conditions listed in categories 1, 2 and
3, also be used for downhill runs in rough terrain up to a speed of max. 40 km/h
Jumps and drops can take place up to a height of max. 122 cm.
irrelevant
<60
Sports & Competition Rides
Cross-Country & Marathon bikes
irrelevant
< 120
Sport & competition riding (high technical demand).
Mountainbikes & Trailbikes
technical skills, practice & good bike control