Environmental Aspects; Disposal Of Packaging And Appliance; General - Pelgrim IDK650ONY Anleitung

environmental aspects

120

Disposal of packaging and appliance

The appliance packaging is recyclable.
The following may have been used:
■ cardboard;
polythene film (PE);
■
■ CFC-free polystyrene (PS hard foam).
Dispose of these materials responsibly and in accordance with government
regulations.
On the data plate is put the symbol
of a crossed-out wheeled dustbin:
This means that at the end of its working life, the product must not be disposed
of as urban waste. It must be taken to a special local authority differentiated
waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative
consequences for the environment and health deriving from inappropriate
disposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources.
As a reminder of the need to dispose of household appliances separately, the
product is marked with a crossed-out wheeled dustbin.
installation
121

General

This appliance meets all relevant CE guidelines.
The data plate on the underside of the appliance indicates the total nominal
load, the required voltage and the frequency.
Safety
This appliance should only be connected up by a registered electrical installer!
The electrical connection must comply with national and local regulations.
The appliance should always be earthed.
Damage caused by incorrect connection, incorrect use or incorrect building in
is not covered by the guarantee.
For correct operation of the appliance it is important that:
■ the power cable hangs freely and is not struck by a drawer;
the worktop is level.
■
The walls and the worktop around the appliance must be made of heatresistant
(>85 °C) material. Even if the appliance itself does not get hot, the heat from a
hot frying pan, for instance, could cause discolouring or damage to the wall or
worktop.