Initial Operation - Pkm SBS 602.4 A+NF Bedienungsanleitung

Temperature setting of the freezer
Press key A once. The relevant temperature indicator flashes. Press key A again.
Now you can set the temperature from -16
NOTICE! If the set temperature of the freezer changes when setting a function
mode (e.g. vacation, Quick-cool etc.), cancel the relevant function mode
immediately (set to "none").

4.3 Initial operation

1. Ensure that the appliance has been installed properly.
2. Ensure that the lower decorative panel has been installed. If the door does not
open/close properly, refer to the instructions on the right panel in the bottom
left corner of the appliance.
3. Plug in the appliance. and it will enter default standard mode. The appliance is
equipped with a power cut-off memory function. After a cut-off of the energy
supply, the appliance will restart in the previously set mode.
4. The appliance starts operation. You can adjust the temperatures individually
using the relevant keys.
5. After a certain period of time you can store food in the appliance.
6. The appliance needs some time to balance temperatures when you have
changed the settings before or when you have stored additional food in the
appliance. The duration of this period of time depends on the range of the
change, the ambient temperature, the amount of food and the frequency of
door-openings.
C to -24 C.
0 0
33