ersa i-CON PICO MK2 Betriebsanleitung Seite 9

EN
01 Adjust mains voltage in ac-
cordance with type plate.
02 Set up soldering station and
stand in a dry place.
03 Check for correct fit of
soldering tip.
04 Place soldering iron into
holder stand.
05 Insert plug into socket.
06 Switch on soldering station.
ATTENTION! Soldering tip is
hot! Risk of burning!
07 Soldering station heats up to
the default value.
08 Press top key to increase tem-
perature, press bottom key to
decrease temperature.
09 Digital display shows actual
value (A) and default value
(B).
10 Solder when the set tempera-
ture has been reached.
11 Place soldering iron only onto
holder stand.
12 After work or during pro-
longed breaks, switch off
appliance and remove plug.
8 English
|
Commissioning
Many thanks for purchasing an
Ersa soldering station.
Read user manual and safety
instructions carefully and keep in
a safe place for future use.
Check contents of package to
ensure that no components are
missing. Contact dealer if a com-
ponent is missing.
Scope of delivery:
- i-CON PICO soldering station
- i-TOOL PICO soldering iron
- soldering tip (fitted)
- holder stand
- user manual
- set of safety instructions
Soldering
The soldering station is design-
ed for soft solder soldering at
various temperatures. After
appliance is switched on, the
soldering tip is heated up auto-
matically to the most recently
set temperature.
The soldering results depend
on how suitable the soldering
tip is to the job. When soldering
large-size jobs, our more power-
ful i-CON 1 and i-CON 2 soldering
stations should be used.
Default value: 360 °C / 680 °F
Value range: 150 to 450 °C
300 to 842 °F
Key to symbols:
Attention!
Danger spot
Hot surface!
Risk of burning!