Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. In order to ensure proper operation, the appliance must not be operated for
a prolonged period of time if the ambient temperature does not meet the values
indicated by the climatic class.
2.
Look at chap. T
appliance. Your appliance can be operated in rooms with relevant room
temperatures as named below
CLIMATIC CLASS
SN
ST
3. Installation
3.1 Site
1. Unpack the appliance carefully. Dispose of the packaging as described in chapter
waste management.
2. Completely remove the transport-protection (adhesive tape) of the accessories.
Be very careful and do not use any aggressive or abrasive detergents to remove
residuals of the transport-protection.
3. Install the appliance in a suitable position with an adequate distance from sources
of heat and cold.
4. Check that the appliance and the power cord are not damaged.
5. Install the appliance in a dry and well-ventilated place.
6. Protect the appliance from direct sunlight.
7. The doors must open completely and without hindrance.
8. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
9. Connect the appliance to the mains properly.
10. The nameplate is situated inside the appliance or at the back.
3.2 Installation
The dimensions of the appliance are registered in chap. T
note the information given in Additional side-attachment at the end of this
D
ECHNICAL
ATA
.
N
T
for information about the climatic class of your
AMBIENT TEMPERATURE
+10
0
→+32
0
C
+16
0
→+32
0
C inner home temperature
+16
0
→+38
0
C inner home temperature
+16
0
→+43
0
C inner home temperature
37
e.g. unheated cellar
D
. Please
ECHNICAL
ATA
Werbung
Inhaltsverzeichnis
Fehlerbehebung
