Installation Drawing - Pkm GK 225.4 A+EBN Bedienungsanleitung

section. Carry out the installation with at least 2 persons..
1. Place the appliance in the built-in unit.
2. The distance of the wall at the handle-side of the appliance and the wall of the
built-in unit must be 5 mm.
3. There are three drillings (two holes each) on the outer edge of the door of the
appliance where the sliding hinge brackets have to be fixed. Remove the hole
cover caps first.
Installation materials

Installation drawing

38
1. Sliding hinges
2. Fixing screws appliance
3. Fixing screws hinges
4. Sealing tape
5. Cover caps
6. Security angle