Personal Safety; Additional Safety Warnings - Ryobi RXBC01 Übersetzung Der Originalanleitung

PERSONAL SAFETY

■
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
■
Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.
■
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
■
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
■
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
■
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
■
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
POWER TOOL USE AND CARE
■
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
■
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
■
Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
■
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
■
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
■
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
2 | English
less likely to bind and are easier to control.
■
Use the power tool, accessories and tool bits etc,
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
SERVICE
■
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
WARNING
Never use cutting means or attachments which are not
specifi ed by Ryobi in this manual. This includes the use
of metal multi-piece pivoting chains and fl ail-blades.
These items are known to break up during use and
present a high risk of serious injury to the operator or
bystanders.

ADDITIONAL SAFETY WARNINGS

■
Some regions have regulations that restrict the use of
the product. Check with your local authority for advice.
■
Never allow children or people unfamiliar with the
instructions to use the machine.
■
To avoid using the product in bad weather especially
there is a risk of lightning.
■
Do not operate in poor lighting. The operator needs
clear unrestricted vision to identify potential hazards.
■
Keep bystanders, children and pets 15m away from the
product while in use. Stop the product if anyone enters
the area.
■
Avoid using on wet grass.
■
Do not walk backwards when using the product.
■
Keep firm footing and balance at all time. Do not
overreach. Overreaching can result in loss of balance
or exposure to hot surfaces. Always be sue of your
footing on slopes. Walk, never run.
■
Beware of objects thrown by the cutting means. Clear
debris like small stones, gravel and other foreign
objects from the work area before starting operation.
Wires or string may become entangled with the cutting
means.
■
Wear full eye and hearing protection while operating
this product. If working in an area where there is a risk
of falling objects, head protection must be worn.
■
Wear heavy long trousers, non-slip protective footwear
and gloves. Do not wear loose fitting clothing, short
trousers, jewellery of any kind, or use with bare feet.
■
Secure long hair so it is above shoulder level to prevent
entanglement in any moving parts.
■
Use of hearing protection reduces the ability to hear
warnings (shouts or alarms). The operator must pay
extra attention to what is going on in the working area.
■
Operating similar tools nearby increases both the risk