Prerequisites For Installation; Location And Space Requirements - SystemAir SAVE VSR 300 Installationsanleitung

GB
Warning
When opening the transport packaging, there is a risk of damage from sharp edges, nails, staples, splinters
etc.
Unpacking
• Check the air handling unit for visible transport damage.
• Only remove the packaging shortly before assembly.
• Beware of sharp edges during mounting and maintenance. Use protective gloves.
6

Prerequisites for Installation

To ensure a proper and fail-free operation, it is important that the unit is installed according to these instructions.
The unit can be installed in the following positions.
A. Upright installation on the floor. Left and right connections are possible.
The enclosed self adhesive vibration dampers must be used.
B. Ceiling installation. Left and right connections are possible.
A ceiling mounting kit is required. Not delivered with the unit. Needs to be ordered separately.
C. Horizontal wall installation Left and right connections are possible.
A wall mounting kit is required. Not delivered with the unit.
D. Upside down installation is NOT allowed.
6.1

Location and Space Requirements

The SAVE VSR 300/500 should preferably be installed in a separate room (e.g. storeroom, laundry room or similar.).
231242 | v01_1.12.0
Fig. 5 Possible installation positions
Prerequisites for Installation |
11