Using The Machine - Clatronic DB 2731 Bedienungsanleitung, Garantie

5....-05-DB 2731
GB
• Clean the ironing base with a slightly damp cloth.
• Fill the water tank through the filler aperture with pure water (up to degree of
hardness 2). If the tap water is harder please use distilled water.
NOTE: Only clothes should to be ironed with this machine.
Removable Water Tank
- Press the release knob (9) and pull the water tank backwards. After the water
tank has been filled, push it into the guide mechanism until it locks in place.
Ironing without steam (steam jet regulator on 0).
1. Place the iron on its stand.
2. Electrical connection
Make sure that the iron voltage (see name plate) and the line voltage match.
3. Sort out the garments according to their ironing temperatures. Start with the
lower temperatures. It is set with the thermostat (1):
• Synthetics, silk
• • Wool, artificial silk
• • • Cotton, linen
4. Only connect the machine to a properly installed safety socket, 230 V/50 Hz.
5. The control lamp (2) lights up. As soon as it shuts off, the set temperature is
reached. Now you can start to iron.
6. Always pull the plug out of the socket after using the iron.
Steam Ironing (
For this a high temperature is needed (cotton, linen). The quantity of steam can be
regulated using the steam quantity regulator (5). Extra steam can be added with the
steam jet function (4).
Spray Function (
In order to moisten a section to be ironed press the spray button (3).
When ironing at low temperatures please ensure that you reduce the amount of steam.
Vertical Steam
This can be used to produce a jet of steam in a vertical direction.
Self-Cleaning (Self-Cleaning)
Any lime residues which form in the sole plate are automatically removed due to
the heat and steam pressure.
32
30.11.2002 8:11 Uhr
First Use of the Machine

Using the Machine

(low temperature)
(medium temperature)
(high temperature)
)
)
Seite 32