Technical Data - EINHELL 43.003.15 Originalbetriebsanleitung

Anleitung_BT_MS_210_T_SPK1:_
Contact with the saw blade in the uncovered saw
zone.
Reaching into the running saw blade (cut
injuries).
Kick-back of workpieces and parts of
workpieces.
Saw blade fracturing.
Catapulting of faulty carbide tips from the saw
blade.
Damage to hearing if essential ear-muffs are not
worn.
Harmful emissions of wood dust when the
machine is used in closed rooms.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

5. Technical data

AC motor
Power
Operating mode
Idling speed n
0
Carbide saw blade
Number of teeth
Extractor socket
Base area
Weight
For use as a bench-type saw:
Saw bench
Cutting depth
Parallel stop Can be pivoted from -30° to + 30°
For use as a crosscut saw:
Swiveling range
Miter cut
Saw width at 90°
Saw width at 45°
Saw width at 2 x 45°
(double miter cut)
24.09.2010 8:48 Uhr
Sound and vibration
Sound and vibration values were measured in
accordance with EN 61029.
L sound pressure level
pA
K uncertainty
pA
L sound power level
WA
K
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 61029.
Vibration emission value a
K uncertainty = 1,5 m/s
Warning!
The specified vibration value was established in
accordance with a standardized testing method. It
230V ~ 50 Hz may change according to how the electric equipment
is used and may exceed the specified value in
1200 W
exceptional circumstances.
S1
The specified vibration value can be used to compare
4,500 rpm
the equipment with other electric power tools.
ø 210 x ø 30 x 2.5 mm
24
The specified vibration value can be used for initial
assessment of a harmful effect.
Diameter 35 mm
400 x 325 mm
Keep the noise emissions and vibrations to a
10 kg
minimum.
Only use appliances which are in perfect working
order.
Service and clean the appliance regularly.
360 x 250 mm
Adapt your working style to suit the appliance.
Do not overload the appliance.
0 - 33 mm
Have the appliance serviced whenever
necessary.
Switch the appliance off when it is not in use.
Residual risks
-45° / 0° / +45°
Even if you use this electric power tool in
0° to 45° to the left accordance with instructions, certain residual
risks cannot be rules out. The following hazards
120 x 55 mm
may arise in connection with the equipment's
65 x 55 mm
construction and layout:
1. Lung damage if no suitable protective dust mask
is used.
40 x 23 mm
2. Damage to hearing if no suitable ear protection is
used.
3. Health damage caused by hand-arm vibrations if
Seite 15
uncertainty
= 0,7 m/s
h
2
GB
99 dB(A)
3 dB
112 dB(A)
3 dB
2
15