Call Duration Display; Adjusting The Receiver Volume; Switching The Mobile Unit On And Off - AUDIOLINE Porty Bedienungsanleitung

Connecting external calls to another mobile unit
If you have accepted an external call, you can forward the external call
to the other mobile unit. To do this, press the
number of the required mobile unit.
If there should be no reply from the mobile unit called, you can take the
call back with the
After the internal call has been accepted at the other mobile unit, you
have the following options:
A. Consultation / Brokering: You can now speak to the internal
subscriber and return to the external caller by pressing the
You can switch between the external and the internal call as many times
as you like in this way.
B. Forward the call: The external call is forwarded to the mobile unit
called by pressing the call button
4.6

Call duration display

The call duration in hours, minutes and seconds is shown in the display
during a call. Ten seconds after dialling, the display will switch from
showing the number dialled to showing the duration of the call. The call
duration will still be retained in the display for a few seconds after the call
has been ended.
4.7

Adjusting the receiver volume

If the volume is too quiet or too loud for you, you can change this to suit
your requirements.
You can adjust the volume during a call in four steps by means of the
and
4.8

Switching the mobile unit on and off

If you should ever not need the mobile unit, press and hold the call
button for 5 seconds and the mobile unit will be switched off.
To switch the mobile unit on again, press and hold the call button
for 2 seconds. The EIN (ON) indicator will appear in the display and the
mobile unit will reconnect itself to the base station.
28
- Operation -
button.
buttons.
button and then the
on the first mobile unit.
button.