Safety; Dangers When Handling This Electric Heat Exchanger; Safety Information And Tips - Behncke EWT-80-40 Betriebsanleitung

Electric heat exchanger / Safety
1

Safety

1.1 Dangers when handling this electric heat exchanger

The electric heat exchanger is state-of-the-art and has been built in accordance with recognised safety
regulations. Nevertheless, hazards can arise when it is being used, namely
- injury to the operator or
- third parties or
- damage to the electric heat exchanger or
- damage to other property.
Anyone involved with the installation, start-up, operation, maintenance and servicing of the electric heat
exchanger must
- be appropriately qualified.
- strictly follow these installation instructions.
This appliance is not intended to be used by people (including children) with reduced physical, sensory
or mental capabilities, or people who lack experience and/or knowledge unless they have been given
supervision or instructions concerning use of the appliance by a person responsible for their safety.
The electric heat exchanger may only be used
- for its intended use.
- when it is in perfect condition from a safety and technical perspective.
In the event of faults which may compromise safety, you must call in an electrician.
A smoke detector must be installed in rooms where electrical appliances are in operation!
It's about your safety.

1.2 Safety information and tips

Symbol
Failure to observe these instructions may lead to faults in the system or in the environment.
1
Signal word / meaning
DANGER
Alerts you to a dangerous situation that will result in serious injury or death if it
is not avoided.
WARNING
Alerts you to a potentially dangerous situation that may lead to death or severe
injury if it is not avoided.
CAUTION
Alerts you to a dangerous situation that will result in minor to moderate injury if
it is not avoided.
NOTE
Alerts you to possible material damage and other important information.