Inhaltsverzeichnis
Werbung
Concrete mixer with threephase motor
After switching on the
machine, you must check
the mixing drum's direction
of rotation. When you look
into the mixing drum, it
must turn to the left
(counter-clockwise).
(Observe directional arrow
on the mixing drum.). If the
mixing drum turns in the opposite direction from the arrow, the
rotating direcion can be changed by inderting a screwdriver for
this purpose and turn left or right while exerting a light pressure to
adjust the correct rotating direction.
M
i
x
i
n
g
M
i
x
i
n
g
Mixer setting:
To make concrete or mortar, the mixing drum must be locked in a
specific position. Only the proper mixer setting ensures optimal
mixing results and smooth operation.
Concrete mixer with adjusting disc
Rotating level
Hold rotating lever or handwheel tightly while rotating.
loosen the rotating mechanism.
rotate the mixing drum up to the appropriate
recess for the material you are mixing.
allow rotating mechanism to lock into place.
Mortar
Concrete
Bearings
14
Handwheel
Concrete mixer with brake
Hold handwheel tightly while rotating.
Step on the brake
Rotate the mixing drum up
to the marking appropriate
for the material you are
mixing
release brake
Additional safety instructions
• Only fill or empty the mixing drum when the motor is running.
• Check the stability of the mixer.
Preparing material for mixing:
1. Pour in water and few shovels full of aggregate (sand, gravel,
...).
2. Add a few shovels full of binding agent (cement, lye, ...).
3. Repeat steps 1 and 2 until you reach the proportions required
for mixing.
4. Allow material to mix thoroughly.
Have a professional advise you regarding the composition
and quality of the material being mixed.
Emptying the mixing drum:
Hold the rotating lever or handwheel tightly
1. Unlock rotating mechanism or step on brake
2. Slowly tilt mixing drum
T
r
a
n
s
p
o
r
t
T
r
a
n
s
p
o
r
t
Pull plug each time before transport.
Point the opening of the mixing drum downwards during
transport or storage.
S
t
o
r
a
g
e
S
t
o
r
a
g
e
In order to increase the service life of the concrete mixer
and operate it without glitches, the rotating mechanism
should be treated with an environmentally compatible spray
oil before the mixer is put into storage for unusually long
periods.
Werbung
Inhaltsverzeichnis
