Mechanical Features - dB Technologies V!O S218F Bedienungsanleitung

English

MECHANICAL FEATURES

A
2
1
B
2
3
4
C
5
6
7
8
The ergonomics of the subwoofer and rapid mounting in multiple configurations are ensured by:
SIDES [view A]
1) Handles (2 per side). Make it easy to lift the subwoofer when it is horizontal.
2) Built-in handles for fastening to the DRK-218F flybar or for stacking multiple subwoofers.
3) Plastic feet (4 on one side) for use in the vertical configuration (an additional fixing is required for this use,
which is not supplied).
TOP [view B]
4) Seats for the bottom feet [8]. These allow multiple VIO S218F units to be stacked stably.
5) Mounting holes for the DRK-212/DRK-210 fly-bar.
6) Cable channels. These let the cables pass between the subwoofers to keep the wiring orderly and simple in the
cardioid configuration.
REAR AND BOTTOM [view C]
7) Cable channels (2 on the bottom). These let the cables pass under the subwoofer to keep the wiring orderly and
simple in the cardioid configuration.
8) Bottom feet (4 in total). These provide stable support and allow stacked configurations to be built.
VIO S218F Cod. 420120416 REV. 1.0
31