Selecting A Channel; Selecting The Ctcss Code - AUDIOLINE Power PMR 55 Sportpack Bedienungsanleitung

Operating the Walkie-Talkies

Selecting a channel

/
Channel Frequency (MHz)
1 446.00625
2 446.01875
3 446.03125
4 446.04375

Selecting the CTCSS code

CTCSS: Continous Tone Coded Squelch System
All the calls on walkie-talkies which occur within the range of reception are sig-
nalled. A condition for this is that all the walkie-talkies are set to the same channel.
To prevent mutual interference, a CTCSS code can be defined for the set channel.
38 CTCSS codes can be set per channel.
Note: CTCSS- and DCS-codes can only be used alternatively.
2 x
/
☞
Each CTCSS code complies to a specific tone frequency transmitted by the
walkie-talkie. Communication between the subscribers is only then possible when
both parties are using the same channel and CTCSS code.
An exception is CTCSS code "00" (= OF / off). In the case of this setting, all the
calls on the set channel can be heard regardless of the CTCSS code. To be able to
participate in the radio communication, it may be necessary to switch from CTCSS
code "00" to the CTCSS code being used.
If you want to communicate with the walkie-talkies which are not
using a CTCSS, you must select CTCSS code "00" on your walkie-talkie.
8
Service-Hotline Germany: Tel. 0180 5 001388 (Costs for call from german
landline at time of print: 14 ct/min, max. 42 ct/min from mobile phone providers.)
Press the menu key.
Press ▲ or ▼ to select the desired channel.
Press the PTT button to confirm.
Channel Frequency (MHz)
5
6
7
8
Press the menu key twice.
Select the CTCSS code and confirm with the PTT button.
446.05625
446.06875
446.08125
446.09375