Operation; Switching On The Radios; Automatic Energy Saving Mode; Channel Selection - AUDIOLINE PMR Easy 008+ Bedienungsanleitung

3

Operation

3.1

Switching on the radios

To switch on the radio, hold the On/Off button pressed until a signal
tone sounds.
The display will be illuminated for some seconds and all the symbols
will be shown in the display. After this the display will show the
currently selected channel.
3.2

Automatic energy saving mode

The radios are designed with a power saving mode. If no
transmissions take place within a period of 10 seconds, the unit
switches over automatically to battery saving mode.
The message STANDBY will flash in the display. The power saving
mode will be ended as soon as you press any button. The automatic
power saving mode does not have any adverse effect on receiving
incoming transmissions.
3.3

Channel selection

The radios have 8 different transmission channels, which are released
by the European Committee for Radio Communications as " Private
Mobile Radio" channels, known as PMR for short.
In order to be able to speak between two radios, both units
must be set to the same channel. Choose between the 8
channels by pressing the CHANNEL switch on the right-hand
side up or down. The display will show the channel that is
currently selected. You can also make contact with other units
that make use of the PMR channels and which are set to the
same frequency. Please refer to the technical data for more
information.
- Operation -
19