Vox Mode; Scanning Channels; Scanning Subchannels (Ctcss) - AUDIOLINE Power PMR 55 Sportpack Bedienungsanleitung

Operating the Walkie-Talkies

VOX mode

VOX = Voice operated transmission.
In VOX mode your handset will transmit whenever it detects your voice (or other
noise) without the PTT button having to be pressed.
When turning on the VOX mode you will set the sensitivity. At the highest level (3),
the handset will pickup softer noise (including background noise); at the lowest
level, it will pick up only quite loud noise.
☞
When you start to speak, there is a slight delay before the walkie-talkie starts
to transmit. If no noise is detected for approx. 2 seconds the transmission will be
cut off.
VOX operation is not recommended if the PMR will be used in a noisy or windy
environment.
4 x
/

Scanning channels

When the Scan function is turned on, the handset will continuously scan through all
eight channels until it finds one on which another user is transmitting.
5 x
/
/

Scanning subchannels (CTCSS)

With this function activated the handset will continuously scan through all subchan-
nels (CTCSS) for the preset channel until it finds one on which another user is
transmitting.
6 x
10
Service-Hotline Germany: Tel. 0180 5 001388 (Costs for call from german
landline at time of print: 14 ct/min, max. 42 ct/min from mobile phone providers.)
Press the menu key 4 times.
VOX is displayed and „OF" flashes on the display.
Select the sensitivity (3 Levels) using the up/down keys and con-
firm by pressing the PTT button.
As long as the handset is in VOX mode, VOX will display steadily
on the display.
For deactivating the VOX mode select "OF" instead of a sensitivity
and confirm by pressing the PTT button.
Press the menu key 5 times.
Press ▲ or ▼ to start scanning.
When a signal is detected the unit will pause.
Press ▲ or ▼ to continue scanning.
Press the PTT button to communicate or to quit scanning mode.
Press the menu key 6 times.