Scanning Dcs; Transmit Ringing Tone; Selecting The Ringing Tone; Setting The Signalling Mode - AUDIOLINE Power PMR 55 Sportpack Bedienungsanleitung

/
/

Scanning DCS

With this function activated the handset will continuously scan through all DCS
channels for the preset channel until it finds one on which another user is transmit-
ting.
7 x
/
/

Transmit ringing tone

The ringing tone indicates to other subscribers that you want to talk to them.
A condition for this is that the other subscribers are using the same channel and
CTCSS / DCS code.

Selecting the ringing tone

There are 10 ringing tones available for selection.
8 x
/

Setting the signalling mode

You can select whether a call should be signalled by the ring ton, the vibrator or
both ringtone and vibrator.
9 x
Service-Hotline Germany: Tel. 0180 5 001388 (Costs for call from german
landline at time of print: 14 ct/min, max. 42 ct/min from mobile phone providers.)
Press ▲ or ▼ to start scanning.
When a signal is detected the unit will pause.
Press ▲ or ▼ to continue scanning.
Press the PTT button to communicate or to quit scanning mode.
Press the menu key 7 times.
Press ▲ or ▼ to start scanning.
When a signal is detected the unit will pause.
Press ▲ or ▼ to continue scanning.
Press the PTT button to communicate or to quit scanning mode.
Send ringing tone.
Press the menu key 8 times.
Select the ringing tone. Confirm with the PTT button.
Press the menu key 9 times.
Operating the Walkie-Talkies
GB
11