Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.2
Switching the radios on and off
To switch on the radio, hold the On/Off button
signal tone sounds. The display will be illuminated for some seconds
and all the symbols will be shown in the display. After this the display
will show the currently selected channel.
To switch the radio off, hold the On/Off button
until a signal tone sounds.
3.3
Volume control
The volume of the built-in loudspeaker can be displayed in 16 volume
steps using the
be shown in the display.
3.4
Channel selection
The radios have 8 different transmission channels, which are released
by the European Committee for Radio Communications as " Private
Mobile Radio" channels, known as PMR for short.
In order to be able to speak between two radios, both units
must be set to the same channel.
1.
Press the MODE button once. The CHAN indicator will flash in
the display.
2.
Select the required channel using the
3.
Confirm the selection with the talk button on the left-hand side.
22
- Operation -
and
buttons on the right. The volume set will
pressed until a
pressed once more
and
buttons.
Werbung
Kapitel
Inhaltsverzeichnis
