Inhaltsverzeichnis
Werbung
16
DTMFST - DTMFST
17
S-CODE - Signal Code
SC-REV - Scanner
18
Resume Method
19
PTT-ID - PTT-ID
20
PTT-LT – PTT ID delay
MDF-A - Channel A
21
Display Mode
MDF-B - Channel B
22
Display Mode
BCL – Busy Channel
23
Lock-out
OFF: No DTMF Side Tones are heard
DT-ST : Side Tones are heard only from manually keyed DTMF codes
MENU+16
ANI-ST: Side Tones are heard only from automatically keyed DTMF codes
DT+ANI : All DTMF Side Tones are heard
MENU+17
1,...,15
TO : Time Operation - scanning will resume after a fixed time has passed
MENU+18
CO : Carrier Operation -scanning will resume after the signal disappears
SE : Search Operation -scanning will not resume
OFF: No ID is sent
BOT: The selected S-CODE is sent at the beginning
MENU+19
EOT: The selected S-CODE is sent at the ending
BOTH : The selected S-CODE is sent at the beginning and ending
0,1,2...,50ms
MENU+20
*PTT-ID Delay (milliseconds)
FREQ: Displays programmed Frequency
CH: Displays the channel number
MENU+21
NAME: Displays the channel name
*Note: Names must be entered using software.
FREQ: Displays programmed Frequency
CH: Displays the channel number
MENU+22
NAME: Displays the channel name
*Note: Names must be entered using software.
OFF
*Disables the [PTT] button on a channel that is already in use. The
MENU+23
transceiver will sound a beep tone and will not transmit if the [PTT]
button is pressed when a channel is already in use.
27
ON
Werbung
Inhaltsverzeichnis
