Cursor▼▲Conversion (A/B); High/Low Power Fast Selec�On; Keypad Lock - Radioddity GT-82 Bedienungsanleitung

5. Press the [EXIT/AB] key to exit the menu.
If you want to momentarily override the lock without having to setting the menu option to OFF, you can do so by pressing
the [EXIT/AB] key an instant before pressing the PTT.
Another option is to disable menu [7] (TDR) to override the lock. Then re-enable TDR when you want the lock resumed
6.5 Cursor▼▲Conversion (A/B)
Directly press [EXIT/AB] key to move the cursor up and down. Then, you can modify or confirm the parameters indicated by
the cursor.
Important1: GT-82 has a dual-frequency display func�on. In frequency mode, you will see on the display two diff
erent receiving and transmi�ng frequencies; while in channel mode the two different channels will be displayed.
Important2: In frequency or channel mode, press the [EXIT/AB] key to shi� between the main channel A and the
sub-channel B
▲ on the display indicates on which channel (main channel A or sub channel B) you are opera�ng.
▼ is displayed next to the channel.
6.6 High/low power fast selection
In channel mode, press [#

6.7 Keypad lock

This func�on locks the keypad to prevent accidental pressure of the controls.
To unlock the keypad, press [#
6.8 FM Radio (FM)
The frequency ranges to listen to the radio is 65-108MHz. When listening to broadcast FM, press [EXIT/AB] key switches
between 65-75 MHz and 76-108 MHz band.
a. In frequency or channel mode, Press [F/SOS] to turn on the radio.
b. Select the desired radio frequency with the ▲ or ▼ keys or input the frequency. or
• Press [* SCAN] to automa�cally search a radio sta�on.
] key to shi� between high and low power.
] for more than 2 seconds.
17