Safety Regulations; Layout And Items Supplied - EINHELL BT-AP 650 E Originalbetriebsanleitung

Important!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.

1. Safety regulations

The corresponding safety information can be
found in the enclosed booklet.
Caution!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.

2. Layout and items supplied

2.1 Layout (Fig. 1+2)
1 On/Off switch
2 Button catch
3 Wood saw blade
4 Metal saw blade
5 Soleplate
6 Blade holder
7 Locking button for soleplate
8 Wheel selector for selecting the blade speed
2.2 Items supplied
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Anleitung_BT-AP_650_E_SPK1.indb 14 Anleitung_BT-AP_650_E_SPK1.indb 14
GB
Important!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Universal saw
•
Saw blade for wood (1x)
•
Saw blade for metal (1x)
•
Original operating instructions
•
Safety information
3. Proper use
The multi-saw is designed for sawing wood, iron,
non-ferrous metals and plastic. It should only be
used with the appropriate saw blade.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Mains voltage: .........................230-240 V~ 50 Hz
Power: ....................................................... 650 W
Stroke rate: ...................................500-3000 min
Stroke height: ........................................... 20 mm
Cutting depth in wood: ........................... 150 mm
Cutting depth in iron: ................................ 10 mm
Maximum saw blade width: ..................... 1.4 mm
Protection class: ...........................................II /
Weight: .......................................................2.8 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level ..................... 86.8 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ....................... 97.8 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
- 14 -
-1
06.02.12 12:44 06.02.12 12:44