Eurochron WH1173 Bedienungsanleitung Seite 45

• Briefly push the button "SET"; the hours of the time flash.
Set the hours with the button "+" or "MIN/MAX".
When changing the time (hours/minutes) or date (year/month/day), the radio tower
icon " " for DCF-reception goes out.
The manual settings for time and date are automatically overwritten when the weather
station receives a correct DCF signal again! The radio tower icon "" is then displayed
again.
If you want to start a reception attempt for the DCF signal yourself, proceed as de-
scribed for initial commissioning (chapter 9 b).
• Briefly push the button "SET"; the minutes of the time flash. Set the minutes with the button
"+" or "MIN/MAX".
• Briefly push the button "SET"; the year flashes. Set the year with the button "+" or"MIN/MAX".
• Briefly push the button "SET"; the month flashes. Set the month with the button "+" of "MIN/
MAX".
• Briefly push the button "SET"; the date flashes. Set the date with the button "+" or "MIN/MAX".
• Briefly push the button "SET"; the indoor and outdoor temperature flashes. Select the desired
unit with the button "+" or "MIN/MAX".
°C = Degrees Celsius
°F = Degrees Fahrenheit
• Briefly push the button "SET"; the indoor temperature flashes.
If you have a more accurate measuring device available for temperature, the value displayed
by the weather station can be corrected with the button "+" or "MIN/MAX". Set the same tem-
perature value at the weather station that your measuring device displays as well.
Briefly push the button "ALM" to have the uncelebrated value displayed if required.
Push the button "ALM" again to return to temperature setting.
• Briefly push the button "SET"; the indoor humidity flashes.
If you have a more accurate measuring device available for humidity, the value displayed by
the weather station can be corrected with the button "+" or "MIN/MAX". Set the same humidity
value at the weather station that your measuring device displays as well.
Briefly push the button "ALM" to have the uncelebrated value displayed if required.
Push the button "ALM" again to return to humidity setting.
• Briefly push the button "SET"; the outdoor temperature flashes.
Proceed as described above for indoor temperature calibration.
45