Klarstein 10031757 Handbuch Seite 15

(2) Setting the power level
1. Press the „Function" button and the light indicator of power [P] turns on.
2. After switching on, the power level is automatically set to 1600 W.
3. Set the desired power using the control knob in range 200-1600 W (10-stage settings altogether).
(3) Setting the temperature
4. Press the „Function" button twice and the light indicator of temperature [°C] turns on.
5. After switching on, the temperature is automatically set to 240 °C.
6. Using the control button, set the temperature to required level in the range of 60-240 °C (10-stage tem-
perature control).
(4) Setting the timer
When the power level
is set:
When the temperature
is set:
(5) Switching off
1. After you are finished cooking, switch off the induction hob by pressing the on/off button; the display will
show [H]. The fan will still run for a while to cool the appliance.
2. When the fan stops, disconnect the appliance from the power outlet and let it cool entirely.
15
1. Press the „Function" button the third time, the power level indicator will
light up and the timer control; the display will show [0:00].
2. Using the control button set the required time in the range of 0:01-3:00.
The setting advances by 1 minute.
3. After setting the timer wait, until the display shows the preset power set-
ting 1600 W. Then using the control button set the required power level.
1. Press the „Function" button the fourth time, the temperature level in-
dicator will light up and the timer control: the display will show [0:00].
2. Using the control button set the required time in the range of 0:01-3:00.
The setting advances by 1 minute.
3. After setting the timer wait, until the display shows the preset tempe-
rature 240 °C. Then, using control button, set the required temperature.